Product Descriptions :
Tioga BMX Race Tyre - PowerBlock - Standard Series - 26" X 2.10"
The ultimate BMX racing tyre, the PowerBlock is designed to efficiently transfer pedal power and other rider inputs into lateral motion. In short, you’ll roll faster with less wasted energy. In steel bead with thicker, stronger sidewall. The standard PowerBlock strikes the sacred equilibrium between performance and value.
Specially designed texture pattern, strategically applied to the sidewall adds abrasion protection without sacrificing casing suppleness.
Distinc 3-stage tread zones are what truly sets it apart.
How do we know? Relentlessness – an 18-month trial-by-error development cycle race confirmed by elite fast2 racers around the world.
Features -
The outer knobs
About half the length of the transition knobs, the outer knobs are designed for maximum compression and traction at lean angles greater than 25 degrees. Typicallynot needed during a clean race, but if things get messy, the outer knobs will keep tracking during aggressive maneuvering and cornering giving you every last bit of grip to get you across the finish line faster.
The centre row "Power Block"
During acceleration, heavy pedaling toorque is transferred to the centre tread zone of the rear tyre. If these centre knobs are too small or tall they will exhibit greater knob flex/compression and stick to the ground just a bit longer before take-off, robbing valuable energy (too much traction is not always a good thing) conversely if knobs are too big or short, the tyre may slip under heavy torque before regaining traction significantly slowing you down.
Each Power Block is proportionally sized to handle the torque without sticking and perfectly balanced with the proper height to minimise slipping all while retaining very low rolling resistance after take-off.
The transition knobs
Substtantially smaller than the centre blocks and in exact proportion to the centre blocks the transition knobs are designed to deform slightly at lean angles greater than 15 degrees. This knob deformation or compression is the rubber "sticking" to the ground which is akin to traction. They are positioned at 45 degree angle relative to the centre knobs to help maintain forward momentum during side-to-side transitions and cornering.
Please read this note before purchasing from us. We strive to provide quality items at highly competitive prices. All stock sold by us is either held in our warehouse, or in our suppliers’ warehouses. We strive to ensure that stock availability is accurate but we are subject to our suppliers systems which are not always up-to-date. It is for this reason that we say it may take up to 14 days for an item to be delivered to you. Most items are delivered quickly. However, if you require or expect an item to be delivered very quickly, please contact us so that we can make sure that we have it in our own inventory available for immediate dispatch. Occasionally, due to circumstances beyond our control, a product becomes unavailable usually for a short period of time. If that occurs we will contact you quickly and discuss with you similar alternate products, or a time for delivery of the product you have purchased, or a full refund.
